Страницы

четверг, 4 марта 2010 г.

Single Sided Threadle Handling

Jump Wrap

have three possibilities: a Front Cross Jump Wrap, a Post Turn Jump Wrap, and a Lateral Lead Out Jump Wrap (Linda call this a Lead Out Push). See the diagram below for the handler's motion for each of these:

Jump Wrap Handling Options




Well the Front Cross Jump Wrap is just what we would do if we were starting out to use Front Cross [FrontCross, LearningFrontCross] to Front Cross Threadle Handling and the Post Turn [PostTurn, LearningPostTurn] puts us behind our dog (in this case not an optimal place to be - although still "do-able"). Interestingly the Lateral Lead Out allows the handler to stay on the take off side of the first jump and still be ahead of the dog, and what if you did it while moving (so it wasn't a Lead Out)? Sounds like an idea... Of course it fits Linda's notion of cueing the dog so he doesn't know he is even going through a gap; to the dog it is just a Jump Wrap.

Send to The Jump
Assuming we've chosen a Lateral Lead Out to handle the first jump how will we send the dog over the second jump? The handler could Front Cross [FrontCross, LearningFrontCross] and put the dog on the handler's other arm. This has the disadvantage of possibly pushing the dog to the back side of the second jump or, to avoid that possibility, the handler has to pull the dog substantially further forward of the take off side of the second jump. Or the handler could wrap the dog entirely around their body with a Post Turn and then Rear Cross [RearCross, LearningRearCross] on the take off side of the jump; again putting the handler behind the dog. These two options are shown in the diagram below:

Jump Send Handling Options



This is a place where Linda breaks with traditional handling views (for all the right reasons). She just backs up until she can direct her dog over the next jump. "Back up?" you might say, "we've always heard to never back up when handling" and that was my first response.

Here is her reasoning. In Linda's system she would cue a 180 degree wrap and front cross with an outside arm. Additionally, she puts her dog on her arm opposite the jump to bring her dog past without him jumping it. In the Threadle in the diagram she'd use her left arm to cue the first jump (which requires a 180 degree wrap) and leave the dog on that arm to draw him past the plane of the second. There is no reason to change sides. To give the dog direction she must move, which in this case is to just back up in the direction she wants the dog to go (toward the second jump). She then uses that same arm to initiate the cue to the second jump.

If you handle the first jump using the same cues as you would to perform a Lateral Lead Out you can also stay on the take off side of the jumps throughout the Threadle. Your backward motion draws the dog to you as you move to the take off point for the second jump. Your near side arm is then used to cue the second jump.

Putting It All Together
Here is the diagram Linda was kind enough to draw and email to me showing the two steps we just discussed (slightly reformatted to fit online):


In the case where the course continues on the take off side of the second jump (step 3A in the diagram above) Linda keeps using the same arm that cued the Jump Wrap/Lateral Lead Out on the final jump. This signals the dog to wrap the jump and keeps the dog on the handler's left arm. This allows for handling a three jump Threadle (just repeat as for the first two jumps) or for taking the dog toward the bottom of the diagram with a Front Cross.

I was initially confused when Linda called the wrap of the final jump in 3A a Front Cross. Think of it this way: if your dog was on your right hand on the way to the final jump you'd have to Front Cross to put your dog on your left hand after the jump. So even though you are backing up over the final jump you can think of the dog as technically being on your right arm and then after the jump the dog is on your left arm; just as if you did a Front Cross over the jump.

In step 3B in the diagram Linda would turn to her left to face forward on the take off side of the jump as the dog commits to the jump to put the dog on her right arm. You might do this if the course continued to the top or left of the diagram. In Linda's thinking this isn't a side change (cross) because had you been moving forward toward the final jump the dog would have been on your right arm both before and after the jump. When moving backward your dog ends up on your right arm after the jump; the equivalent of not changing sides had you been moving forward.

What Can Go Wrong?
When learning this handling I like to give handlers two "landmarks" to help them (Linda pointed out that these aren't necessary if you are correctly using her handling system).

1.The handler shouldn't be at or past the standard of the second jump when calling the dog over the first jump.
2.The handler should stay on the take off side of the jumps.
If the handler starts at or past the second jump they can't be using their motion to draw the dog to the take off side of the second jump. Only after the dog is committed to the first jump should the handler's motion cue the dog to the front of the second jump and not support a line to the back side of the second jump.

If the handler doesn't get to the take off side of the second jump the dog won't be able to jump it. Now you don't have to remain on the front side of the first jump, your backward motion does draw the dog to you, but I've found it easier to move straight down the front of the jumps rather than drawing the dog backwards along the curved Threadle path.

Handling In Action
I shot video of Meeker and me learning this handling and have posted it below. In these clips he's been learning the game for about 8 months. But we have been working on One Jump Drills throughout that time. So to him the first jump is just like the Lateral Lead Out exercise. In the video we are working a three jump Threadle starting from a lead out and then repeating again to a third jump. That way you can see that this handling can also be used when you are already in motion. I also show both of the endings of the Threadle and show the handler error where I've started the Threadle passed the plane of the second jump.

Комментариев нет:

Отправить комментарий